If you are a costume jewellery junkie like me and are very frustrated to see your necklaces all tangled up when you want to quickly pick them up and wear them on the go, here is a DIY(DO IT YOURSELF) Necklace organizer for you all!
It is a simple Diy that will leave your necklaces completely organized and will protect them for a long time from the damage and wear-out due to tangling and pulling.I am sure It'll make you feel very happy and self satisfied at the end result.
Here are the thing that you will require
1.A wooden plank
2.Spray paint (colour of your choice)
3.J hooks (number as required,i used about 22)
4.2 stand hardware to attach the jewellery hanger to the wall
5.Screws(6 totally) 4 short ones for screwing stand hardware to the plank and two bigger ones for the wall
6.An electric drill to make holes on the plank and on the wall to attach the organizer to the wall
7. Inch tape
8.pencil to mark
Step 1
Take the wooden plank,measure with an inch tape and mark the desired length and breadth of the plank that you want to cut.It purely depends on the space you have on the wall to hang the organizer!Mine was 22" in length and 3'' in breadth.
Step 2
Spray- paint the plank with two or three coats on all sides ,allowing each coat to dry completely before spray painting the next coat or the next side.
Step 4
Using an electric drill, make holes on the plank and screw the J hooks in the holes,using hands initially and using pliers for the last few turns ,as it will get too tight in the end.
Step 5
Make holes for the stand hardware and screw them to the plank
It is a simple Diy that will leave your necklaces completely organized and will protect them for a long time from the damage and wear-out due to tangling and pulling.I am sure It'll make you feel very happy and self satisfied at the end result.
Here are the thing that you will require
1.A wooden plank
2.Spray paint (colour of your choice)
3.J hooks (number as required,i used about 22)
4.2 stand hardware to attach the jewellery hanger to the wall
5.Screws(6 totally) 4 short ones for screwing stand hardware to the plank and two bigger ones for the wall
6.An electric drill to make holes on the plank and on the wall to attach the organizer to the wall
7. Inch tape
8.pencil to mark
Step 1
Take the wooden plank,measure with an inch tape and mark the desired length and breadth of the plank that you want to cut.It purely depends on the space you have on the wall to hang the organizer!Mine was 22" in length and 3'' in breadth.
Spray- paint the plank with two or three coats on all sides ,allowing each coat to dry completely before spray painting the next coat or the next side.
Step 3
Make marks on the wood with a pencil as to how many rows and columns you need.Make sure the points are diagonal so that they are not one on top of the other in a straight vertical line, to prevent the top hook necklace from getting on the way of the hook below!Using an electric drill, make holes on the plank and screw the J hooks in the holes,using hands initially and using pliers for the last few turns ,as it will get too tight in the end.
Step 5
Make holes for the stand hardware and screw them to the plank
Step 6
Using the drill make holes on the wall (on pre-marked points with inch tape and pencil )and insert screws on the wall .
Step 7
Hang the organizer to the wall and hang your valuable necklaces on the organizer with pride!!!your necklaces will stay safe and happy!!
Beautiful one merrittaa !!!
ReplyDelete